Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Running gear (http://www.haynes.co.uk/forums/forumdisplay.php?f=5)
-   -   Setting rear wheel alignment (http://www.haynes.co.uk/forums/showthread.php?t=14235)

jps 24th January 2020 11:49 AM

Setting rear wheel alignment
 
I have seen various posts and resources about setting the wheel alignment, and understand the 'string box' process, which I plan to use.

However- the first starting point - defining the centre line of the car, and then consistently working back against it, is what I am struggling with a little.

One suggestion seems to be to attach a length of box to the car (wider than the track) - probably behind the rear axle, at 90deg to the car centre - to give a definitive reference point for the 'string box'.

Has anyone done this in practice and can share how?

I can see no end of potential for imprecision if I simply fit a couple of rivnuts to the chassis, then bolt up a length of box using say an 8mm hole with m8 bolts (given the amount of 'slop' in a standard hole!)


All times are GMT +1. The time now is 09:12 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.