Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Bodywork and interior (http://www.haynes.co.uk/forums/forumdisplay.php?f=8)
-   -   3m dinoc (http://www.haynes.co.uk/forums/showthread.php?t=7485)

shh120m 29th November 2011 08:39 PM

3m dinoc
 
Hi guys,

had the afternoon off work today, i was under orders to do some decorating but i got bored so decided to finally have a play with some dinoc vinyl i bought ages ago. Iv been a bit scared of cocking it up as its so expensive, hence why its been in the cupboard for ages, but anythings better than rubbing down skirting boards so i thought id have ago at the flyscreen to break myself in gently. I was intending to wrap the rear tub and side panels, but it may end up looking a bit drab, what do you think? Turned out pretty good, a lot easier than i thought it would be, a bit time consuming mind.Its a bugger for fingerprint marks though. I did lose track of the time and ended up in trouble with the missus but hey ho.... macdonalds for me tonight:eek:




Jimmyd 29th November 2011 08:48 PM

Good job, Like it. It seems great results can be achieved with the 3M products with a bit of time and patience.

adrianreeve 30th November 2011 06:23 AM

I did my rear panel and sides, pretty happy with the results







Cheers

Adrian

Cyberbeej 30th November 2011 05:26 PM

very nice, i like the sides.

shh120m 30th November 2011 06:15 PM

cool, maybe il do it then!:D

adrianreeve 30th November 2011 06:49 PM

It was easy enough to do, the hardest part was doing the long side panels by myself. If you've got enough, you can get carried away like I did and do the tunnel top, wing mirrors, bonnet stripes and anything else I could think of. Actually I'm thinking of ditching the bonnet stripes, as it was really hard to get it looking straight over the bonnet bulge, and it's the only part I thought looked pants after I'd done it! Other than that, I have. Othing but praise for the stuff!





Cheers

Adrian

shh120m 30th November 2011 07:04 PM

yeah, im probably going to have to limit myself as iv got a 10m by 1 meter roll. Might end up flogging offcuts off otherwise il end up wrapping everything!

Bonzo 30th November 2011 07:17 PM

Great work chaps
 
Nathan

Cracking job there, certainly transforms that aero screen :)

Adrian

That's one seriously cool job you have done there :) :cool:

Looks as if you are well on target for a spring IVA .... Way, way ahead of me :o

adrianreeve 30th November 2011 08:18 PM

Ronnie

Hope so mate! Down to the diddly jobs now (and mapping the engine!), so should be ready for spring.

Haven't forgotten our deal, Marazion at Easter!

Cheers

Adrian


All times are GMT +1. The time now is 09:56 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.