Hmmm. Difficult to change the pivot points at this end, may be easier to change it at the throttle body.
How much would you say it is out? Is there say twice as much travel as you would expect? Cheers Stot |
I would say twice as much. It may be ok if you don't put any grip tape on the peddle as you can slide your foot forwards and let it slip under your foot. I've got grip tape on mine and it feels really awkward. (If that makes sense).
|
I cant really change the pivot distances at the pedal theres just not the space, so I guess there are 2 options
Turn a smaller pulley for the throttle body. Put a pulley on the bottom of the pedal and loop the cable back to the backplate. This will create twice the cable pull for the same pedal travel. I would need to use a longer cable but they are cheap enough. I think option 1 is easier. Cheers Stot |
Heres how the throttle body pulley can be modified.
This would give 1/2 the pedal travel to WOT and really simple to turn one up on the lathe. Cheers Stot |
Quote:
|
Quote:
I think the TB linkage is a better idea though. :D Cheers Stot |
Yep --got it .Old age creeping in:rolleyes:
|
Have you considered making a bell crank which would give you you a 2:1 or 1:2 ratio?
|
Quote:
I'll give the TB pulley/linkage a go first,its a 10 min job on the lathe and mill. Cheers Stot |
Quote:
Didn't Skov say that Nathan supplied him with the wrong pedal and this is what caused the long travel? Not quite sure now.... |
All times are GMT +1. The time now is 05:29 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.