Haynes Forums - Wishbones

Haynes Forums (http://www.haynes.co.uk/forums/index.php)

- Running gear (http://www.haynes.co.uk/forums/forumdisplay.php?f=5)

- - Wishbones (http://www.haynes.co.uk/forums/showthread.php?t=13753)

SteveH1

14th October 2015 08:59 AM

Wishbones

Hi all
Is it just the wishbone bush tubes that have to be seamless or does all the tube have to be seamless.
Thanks
Steve

SteveH1

14th October 2015 10:19 AM

Cheers for that.
Also what thickness are the wishbone plates cant seem to see it in the book i also cant see what thickness the bulkhead plates are.
Thanks

SteveH1

14th October 2015 07:26 PM

Quote:

Originally Posted by TalonMotorFabrication (Post 102025)

In the corners of the drawings it says some along the lines of '3 plate' or '5 plate' it means 3mm or 5mm. Front wishbone plates just buy on Ebay but get the laser cut ones not the plasma items you'll be far happier with them.

Cheers dont know how i didnt see that must be the sleep deprivation from the new baba

All times are GMT +1. The time now is 04:51 PM.