Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Electrics (http://www.haynes.co.uk/forums/forumdisplay.php?f=7)
-   -   Crude Starter pls help (http://www.haynes.co.uk/forums/showthread.php?t=1165)

SeriesLandy 21st November 2008 05:17 PM

Crude Starter pls help
 
1 Attachment(s)
Ive stripped the wiring loom out of my sierra but still want to be able to move the car and run it once a week. I think my diagram is ok just the be able to get the car running but am stumped as to where the -ve from the coil goes (on my series 1 landy it goes to the points) so does it go into the dizzy (3 pins on the side) or does it go onto the side of the carb (Pierburg 2E3). Please help me sort the problem.

Many thanks
Steve
Attachment 167

les g 21st November 2008 07:36 PM

steve
please post details of car i,ll look in the haynes manual for you
les g

SeriesLandy 22nd November 2008 05:13 PM

Thank you for scanning the book in but the 1.8 ohc is in the top right and half cut off, but ive got the book so its ok. I was just trying to get it to run, I dont want to take it on the road or anything just to be able to turn it over ect.

dogwood 22nd November 2008 06:27 PM

Try this.

I think this is how I did it.

only doing it from memory
So apologies if it don't work

David


les g 22nd November 2008 07:56 PM

erm! sorry that was tj,s doing
i,ll kick his butt for him
lol
les g :o :o :o

SeriesLandy 22nd November 2008 09:31 PM

Quote:

Originally Posted by les g (Post 7671)
erm! sorry that was tj,s doing
i,ll kick his butt for him
lol
les g :o :o :o

Thats alright, decided I would brake it if I tried to bodge it so started to remove bits, now need to get a new gasket for the rocker cover (motor factor?) it was a bit split.


All times are GMT +1. The time now is 09:42 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.