Haynes Forums - Sensor Plug

Haynes Forums (http://www.haynes.co.uk/forums/index.php)

- Electrics (http://www.haynes.co.uk/forums/forumdisplay.php?f=7)

- - Sensor Plug (http://www.haynes.co.uk/forums/showthread.php?t=3557)

Jimmyd

30th January 2010 06:17 PM

Sensor Plug

Bit of a long shot but would anyone happen to have a plug for a CVH crank pick up sensor needing a new home? Is all Ford ones the same?

J

AshG	30th January 2010 06:21 PM

Quote:

Originally Posted by Jimmyd (Post 30047)

Bit of a long shot but would anyone happen to have a plug for a CVH crank pick up sensor needing a new home? Is all Ford ones the same?

J

3 pin or 2 pin?

is it like the ones at the bottom of the sensors and connectors page here?

http://trigger-wheels.com/store/index1.html

HandyAndy

30th January 2010 06:40 PM

i "might" have one , will check when i go to the Saturn unit tomorrow.

will get back to you.

cheers
andy

Jimmyd

31st January 2010 10:31 AM

Thanks Ash, It's the two pin jobbie. Forum never fails!!

J

Quote:

Originally Posted by AshG (Post 30048)

3 pin or 2 pin?

is it like the ones at the bottom of the sensors and connectors page here?

http://trigger-wheels.com/store/index1.html

baz-r

11th February 2010 05:32 PM

you can buy new conector if its the oblong type with the little spade type pins in i think thay where made by amp connectors orignaly

like this http://www.simtekuk.co.uk/www.simtek...?p=12&cat=1630

All times are GMT +1. The time now is 02:00 PM.