seat belt mounting plate nut size
hi guys anyone out there now what size nut to use on the seat belt mounts as i can only get metric and in the book it is 7/16ths ??????
|
It depends how your going to fix your seatbelts. 7/16th is industry standard. If you buy a belt with bolts on, they'll be 7/16th. If you buy a belt with clip on ends, then the eyebolts are going to be 7/16th aswell :eek:
You can buy seat belt stuff from these guys https://www.europaspares.com/HARNESSES/NUTS_and_BOLTS/EYE_BOLTS__STRESS_PLATES__SEATBELT_NUTS_AND_BOLTS_ 2335.html |
7/16ths unf !:D
|
Quote:
|
Hi Steve
Personally, I would use the 7/16" UNF fixings ;) You should not have any problem getting that size nut, they are still in quite common use. My local steel stockist keeps them at a cost of less than 10p each :) Would have sent you some up but have only got 2 left :rolleyes: |
Quote:
|
Quote:
|
Event the completely metric Sierra uses 7/16" UNF for all the seatbelt mounts! I've put aside the bolts just in case and cut out some of the captive nuts of the rear seatbelt mounts to reuse on the roadster.
|
I used M10, as long as they are m8 or bigger your fine acording to iva book 7/16 is about 11mm for referance i made some adapters fancy steped washers to fill the oversize hole in the harnesses
tilly |
All times are GMT +1. The time now is 08:16 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.