Exhaust flange CAD drawings
 

hi guys, i thought i would start on my exhaust this weekend & was wondering if anyone had CAD drawings for the pinto exhaust flange, i would like to have it water cut in stainless . I would be greatfull for any help .
thanks
Samy

Just give the water cutters a gasket, they can do it from that

would tracing the gasket work ? can i just trace it on a paper & scan it to te computer?:confused:

I have just been drawing some - haven't made any yet but will get around to it at some point. I've made them to the exhaust port shape + 1.5mm to allow for a tube to be swaged out to fit. You're welcome to a copy of a DXF but I would make a cardboard prototype before you get any cut.

Also if anyone has a drawing for a pinto inlet flange that would be much appreciated - b***dy hard thing to draw!

I´d love a copy david that would be great & i´ll try it first to make sure it fits before cutting the real one .
cheers

Right

Just done a quick check against a gasket I have in the house and looks pretty close. Will prob be getting some myself after xmas so let me know how you get on.

So here is the file - as I say use with care!

http://rapidshare.com/files/29929460...lange.DXF.html

Cheers

Dave

david you wouldnt happen to have the inlet one would you?

the guy that does my laser cutting has them on file, both inlet and exhaust for a pinto

pm me and i will put you in touch

i just want the file i don't need them cut ;)

Thank you so much David that looks geat i´ll compare it to the exhaust flange from my sierra & i´ll let you know how it turns out:)
cheers
Samy