pinto sierra ignition aplifier
Hi people does anyone know the wires on Ford ignition amplifier I know brown is earth yellow and green and red and black are dizzy black and green are starter I know green is coil its the black wire I am not sure about also the coil had a black wire to it but I am sure that is to earth
Any help would be appreciated |
Which Pinto, 1.6,1.8 or 2.0
TT |
1.6 pinto does it make a difference ?
|
Br = ground
Black/Red = Hall sensor on Dizzy Green/yellow = Hall sensor on Dizzy Green = not use Black/green = Live whilst cranking Black = Ignition live 1.8 and 2.0 use ESC units 1.6 uses a basic TFI unit. TT |
Green is deffinetly a coil wire because it has the coil plug on it
|
Yeah, sorry, I totally missed a solder point on the diagram... The diagram was making no sense till I spotted that.
TT |
Green is deffinetly a coil wire because it has the coil plug on it
|
So could I put the ignition live and live while cranking to starter solinoid
|
No, the starter solenoid is only live during cranking, the minuet you let off the key your engine would cut out.
TT |
All times are GMT +1. The time now is 11:03 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.