brake part list
getting my brake pipes together this week, what do i need to get?
Ive got about 25ft of copper hose, im planning to get my braided hoses from rally design, im just trying to put a list of what ends etc i need. so far i have
so help me finish the list guys so i can get it all done in one hit. |
without trying to hard sell the kits we at Saturn supply but if you look on our website in the stores page under brake & suspension products, it lists what parts are in our "Brake kits",
hope this helps, & if you have trouble sourcing the parts .... you know where to get them :o ;) :D cheers andy |
Well your also going to need some T-pieces for the rear and also where you attach the pressure switch too. Then you'll need all your unions for connecting it together. Also don't forget all your P clips for fixing the lines down, along with the tools for flaring and bending the copper hose.
|
lol andy im trying to get the brakes done Before i come to see you and spud!
is your kit suitable for rear discs? Carl |
The kits we supply are universal, & so yes, depending on how you intend to route your brake lines to your rear discs this kit should do the job, tho I have read somewhere some folk put an extra "T" piece in for rear disc setups :confused:
cheers andy |
with the standard master cylinder isnt it one line to the rears and a line to each of the fronts as there are only 3 points on the master cylinder
|
Quote:
Like i said earlier "that i,d read somewhere that some folk put an extra "T" piece in the rear"......I just don,t why.:confused: :o cheers andy |
just a thought andy looking at your kits i dont think your rear flexis will clar the wheels when using the book spec uprights for discs and turning the calipers upside down.
|
All times are GMT +1. The time now is 03:16 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.