Progress Update Pic Heavy
 

Had a really busy morning, as shown in the pics, I have now done all the cuts in the grp (what a relief ). Just need to work out the best way of fastening it all to the chassis now. I'm thinking that in most locations I am going to use self tapping screws but in hard to access areas I will use riv nuts and hex head bolts (nose cone etc).

Getting all the Grp on has certainly given me the kick up the backside I need to get it finished, starting the engine every now and again helps too. Wont be long and I'll be wiring up the lights ...................... cant wait for that first spin on the road !

Cheers Dan

Looking really good. Like the colour scheme its going to be very :cool:bright :cool:

As for fastening, Iv'e used rivnuts all over and a mixture of m6 and m5 Dome allen head bolts and m6 bolts.

All are fastened out of sight apart from 2 that sit at the bottom of the curveed bit. They will never be seen though as I'm going to use a pair of sill protectors there.

Looks great! well done!