Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   General discussion (http://www.haynes.co.uk/forums/forumdisplay.php?f=10)
-   -   Steveh1's build (http://www.haynes.co.uk/forums/showthread.php?t=13647)

RandyBMC 10th April 2018 04:07 PM

Just read through your whole build. Really nice fabrication work and welding! Keep it up - I'm following with interest.

SteveH1 11th April 2018 09:16 AM

Thanks a lot. Its slow going.

SteveH1 30th April 2018 10:13 PM

So ive been slowly tipping away doing a few bits and pieces
Mostly stripping and cleaning the hubs with wire brushes in the drill which is a pain
Another kit car builder dropped in last weekend and suggested electrolysis rust removal
This is something i was hoarding stuff for but was too lazy to actually do
so not long after that fella left i got cracking

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

I gave a part 6 hours and it was quiet clean which made me happy

SteveH1 30th April 2018 10:24 PM

So then i got impatient

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

And started on another bigger one

I also did a bit of filler work on the bonnet

Untitled by stephen harborne, on Flickr

SteveH1 1st May 2018 10:01 PM

So i Gave the knuckle 24 hours in the bath
And i have to say i am delighted with the results compared to the effort and time it took with the drill and wire brush

When i took it out of the bath it still had some flakey bits so i gave it a blast with the power hose to remove what was left
Then i dried it and ran over it with the wire brush
and gave it a coat of kurust
Also the process removes all the grease and grime and crap

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

SteveH1 1st May 2018 10:04 PM

This is what it looked like before

Untitled by stephen harborne, on Flickr

2 on the go now

Untitled by stephen harborne, on Flickr

Ianr 1st May 2018 10:48 PM

Brilliant - welcome to the club - worked for me as well on loads of rusty bits for my build :)

RandyBMC 2nd May 2018 07:42 PM

Wow - I've been toiling away with a parts washer, pressure cleaner and wire brushes! That looks a lot easier.

SteveH1 30th July 2018 11:05 PM

So ive a serious pain in my face at the moment cleaning and painting and reassembling the engine
Before
Untitled by stephen harborne, on Flickr
Current
Untitled by stephen harborne, on Flickr
Im also doing a coil on plug upgrade as i had all the parts i needed so it didnt cost me anything
Untitled by stephen harborne, on Flickr
Untitled by stephen harborne, on Flickr

SteveH1 1st August 2018 08:17 AM

Some more progress

Untitled by stephen harborne, on Flickr

Im also going to do some kind of diy coolant reroute
Havnt got it fully figured out yet

Untitled by stephen harborne, on Flickr

This part fits nicely of the back of the engine like so
Untitled by stephen harborne, on Flickr


All times are GMT +1. The time now is 06:08 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.