Harness top mount covers - what are you using?
My car is pretty much ready for IVA, apart from covers for the harness top mounts, and its beginning to pi$$ me off!
I can't find covers that will actually go over the top mounts of my Sabelt harnesses. I've tried the Pajero ones on eBay, but they are nowhere near wide enough. I tried emailing Sabelt directly (twice!), and got no reply. What have you guys found that works? Cheers Adrian |
Nut cap on the bolt and edge trim on the plate?
|
Ash's car failed IVA at the same test centre I'll be using with a nut cap and trim, so I'm trying to find an alternative.
Cheers Adrian |
i used a piece of black vinyl fabric. Bolt through the middle, sown across one side and press stud the other to get to the bolt, passed IVA with no problems,
|
|
Having got round the seat belt problem did it then fail on not having any triangulation on the roll bar?
|
Is it a testable item as its not used for the seat belt mounting,as long as it conforms to projections,sharp edges etc.
|
Ah yes I see your point, sorry I missed that the belts where not mounted to it.
|
Next year for sprinting I'm changing the roll bar and possibly having a removable brace bar from it into the passanger footwell which defiantly wouldn't pass IVA!
|
All times are GMT +1. The time now is 07:35 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.