Chassis plate missing hole diameter in plans CP10
Started to make the plates for the chassis and have got to CP10 and have noticed that the dimensions are missing for the 2 holes as seen below...
Could someone please let me know what size these have to be? Cheers. |
We put a pair of 12mm holes in these.
|
Have a look at DS2 that it bolts too. 13 mm clearance hole :) Its for an M12 Bolt
|
Brilliant. Thanks both.
|
Mine are 12mm
|
Drilled these out to 12.5mm. Should be sweet. Going to start a project thread later on.
|
All times are GMT +1. The time now is 03:12 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.