finally got round to starting
 

Hi all finally got round to starting my build after a long !! time .It took me over 12 months to build my shed /workshop so i could start my build .
just a quick couple of questions for anyone really
1 what are the dimensions of the holes to be drilled in CP 10 .it doesn't show them in the book
2 is it a mistake or are diagonals d1 d2 d3 and d4 19mm box section

The CP10 plate holes are 13mm diameter. Same as the diff plate thats bolting to it.

The diagonals (d1-d4) are 19mm box section

Thanks
 

Thanks for the quick reply ,i can go out and get the 19mm for the diagonals and start on the back section now .

Don't forget the build pictures...

TT

build pictures
 

took some photos yesterday afternoon but i am struggling to upload them as they are in jpeg but are too big at 1mb each :confused:any help would be apreciated

Hi, and welcome!
I had the same trouble yesterday, someone on here suggested photobucket photo hosting site, just google it, then put your photos on there and copy the linky thing and paste it into your post on here.
Sounds simple but I am sure someone else will explain it better than me, anyway if I can do it then your pet monkey can as well!
Dennis.

photos
 

Thanks i will try to get the pictures on by tommorrow.:)

welcome to the forum Steve :)

best wishes for your build, don,t forget to add your current build onto the thread " How many Roadsters being built".

any questions.....just ask if you can,t find the answer in the search facility, we,ve all had questions that needed someone elses input ;)

cheers
andy

Another Steve we will slowly outnumber the many Andy's, welcome to the forums.

Good luck and any questions just ask and you should get a quick reply.

Here are the pictures so far