Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Donor cars (http://www.haynes.co.uk/forums/forumdisplay.php?f=3)
-   -   MX5 LSD etc (http://www.haynes.co.uk/forums/showthread.php?t=7361)

rdodger 3rd November 2011 05:34 PM

MX5 LSD etc
 
Hi

I am breaking a MK2 99 NB 54000 mile mx5 to use the engine, box, loom and steering column but have loads of bits I'm selling off.

I thought someone might be interested in

LSD Torsen B type 4.1 ratio £350
Drive shafts pr £40
MK1 front uprights/hubs pr £30
MK2 front uprights/hubs pr £30
Mk2 rear uprights/hubs pr £30

£400 for the lot!

Cheers

Rog

Big Vern 3rd November 2011 08:35 PM

Quote:

Originally Posted by rdodger (Post 67447)
Hi

I am breaking a MK2 99 NB 54000 mile mx5 to use the engine, box, loom and steering column but have loads of bits I'm selling off.

I thought someone might be interested in

LSD Torsen B type 4.1 ratio £350
Drive shafts pr £40
MK1 front uprights/hubs pr £30
MK2 front uprights/hubs pr £30
Mk2 rear uprights/hubs pr £30

Cheers

Rog

Hi Roger you have a PM

Cheers BV.

rdodger 3rd November 2011 08:44 PM

You have pm too!

Davidbolam 3rd November 2011 09:21 PM

Do you have the spring clips off the handbrake available? I cannot seem to get these anywhere. (I mean the clips that hold the handbrake cable in place where they enter the car?)

rdodger 3rd November 2011 10:14 PM

I'm sure I will have.

I am pulling it apart this weekend so will get back to you.

spud69 4th November 2011 09:06 AM

Quote:

Originally Posted by Davidbolam (Post 67463)
Do you have the spring clips off the handbrake available? I cannot seem to get these anywhere. (I mean the clips that hold the handbrake cable in place where they enter the car?)

Standard circlips do the job fine David.

AndyH

Davidbolam 4th November 2011 09:51 PM

Is it the e type circlips that you mean andy?

Like these

http://www.springfasteners.co.uk/dep...1500_st_steel/

spud69 5th November 2011 10:46 AM

Quote:

Originally Posted by Davidbolam (Post 67525)
Is it the e type circlips that you mean andy?

Like these

http://www.springfasteners.co.uk/dep...1500_st_steel/

Sorry David, yes it is the "E" clips i meant to say.

Cheers....AndyH


All times are GMT +1. The time now is 07:25 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.