metal suppliers??
any1 know the best place to get the chassis box section from in shropshire area??
also what type do i need i know it says in book but has anyone used differant thickness etc? thanks |
No idea about shropshire but it's worth just putting "steel stockholder" into google maps with your postcode and see what comes up. I phone round all the ones that came up near me to find one that would deliver and had the best price. I used 25x25x1.5 erw (7 of) and 19x19x1.5 erw (3 of) which was £110 delivered. It's also worth getting some 3mm plate for all the brackets & plates etc. I bought a 2m x 1m piece of this but it was too much in some ways. I ended up using a majority of the leftover for my floor but something like checkered aluminium would have been better and cheaper.
|
I'm using 25 x25 x2.5 for my chassis.
Its off-cuts from work so beggars cant be choosers. I have drawn the chassis on Autodesk Inventor and compared the weights and I think it will be about 14kg heavier. No contest though when its free. I think a lot of people use 25 x 25 x 2mm anyway. Andy |
Going from memory going from 25x25x1.6 to 25x25x2 is an increase of 25% in weight but gives a 30% increase in torsional rigidity.
|
Probably the largest steel stockholder in Shropshire is Christmas Steels in Shrewsbury, they're pretty good when it comes to the smaller bits n bobs you'll want as they'll generally allow you to root through the offcuts bins.
D. |
All times are GMT +1. The time now is 05:54 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.