Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Running gear (http://www.haynes.co.uk/forums/forumdisplay.php?f=5)
-   -   14inch wheels (http://www.haynes.co.uk/forums/showthread.php?t=12898)

irondoctor 20th August 2013 09:01 PM

14inch wheels
 
Hi
My Sierra came with 14inch wheels which I would like to retain, could someone please tell me what the clearance is between bottom bolt in rear upright and alloy rim is on a 15inch wheel?



I have done an on the back of a fag packet drawing and 14inch wont go with std uprights at 170mm radius.



now how about if I move RU6 up 15mm in my assembly of the upright, this will give a clearance, Do you feel this would be of eny detriment to the suspension.

David

baz-r 22nd August 2013 10:48 PM

14" steels only just fit as do 15" alloys!

alga 23rd August 2013 05:13 PM

I just went out and measured the inner diameter of several wheels I have in the garage at about where the rear upright bolt sits. In 14" steel wheels it's indeed ~345mm, but in the 15" it was 365 and 369 or so.

alga 23rd August 2013 06:11 PM

With a 15" alloy wheel I can fit a finger between the wheel and the bolt, but the knucke is catching a bit.


All times are GMT +1. The time now is 12:29 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.