Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Electrics (http://www.haynes.co.uk/forums/forumdisplay.php?f=7)
-   -   Wingmirror/indicator combo? (http://www.haynes.co.uk/forums/showthread.php?t=14100)

Eternal 7th July 2017 03:20 PM

Wingmirror/indicator combo?
 
Anyone use wingmirros with indicators built in to meet the criteria for the IVA? I have just realized i have bit of a problem and only have rear and front indicators and think i will need a middle set. Bugger!

garyt 7th July 2017 04:30 PM

There was some talk of this before but I think it was to do with the visibility of the indicator
I used button led ones on the outside edge of the front cycle wings and passed no problem with them

rpjg1975 7th July 2017 06:57 PM

From memory I think most have little repeaters on the front top edge of the rear arch. Always seemed daft because they weren't even at the highest point but I was something to do with measurements from a certain point at the front so the top/middle of rear arch is too far back!! I was going to put some on the side of the scuttle but think there was a reason why it wouldn't pass Iva. No reason not to go with them after Iva though ;)

garyt 7th July 2017 08:01 PM

On the body side or on the scuttle side they are blocked from view by the rear arches when viewed from the lower rear test
I believe some folk have used the self adhesive ones on the front wings and changed them afterwards, but this would be open to interpretation by the tester to if they are a "permanent" fitting for the purpose of the test


All times are GMT +1. The time now is 08:52 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.