Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Chassis (http://www.haynes.co.uk/forums/forumdisplay.php?f=4)
-   -   Talon Chassis (http://www.haynes.co.uk/forums/showthread.php?t=13919)

CarlW 2nd August 2016 01:48 PM

Talon Chassis
 
Hi Guys,

About to order a Talon Chassis, the TMXR one.
I am going to build as Sierra kit but with Zetec 2.0L engine, Type 9 Transmission and Sierra diff.

Any issues you foresee before I order the flat pack?


Cheers!

vmax1974 2nd August 2016 02:36 PM

The tmxr is for the mx5 donor just ask him for the standard chassis kit of you are using a sierra donor

CarlW 2nd August 2016 02:48 PM

Hi,

The message I got was that the chassis is sierra based, just with extra parts supplied to fit MX5 if required so just a case of bits I wont need. :confused:

vmax1974 2nd August 2016 05:01 PM

I believe the transmission tunnel is different on the tmxr chassis he till do a type 9 tunnel for you just ask him when you order the flatpack

CarlW 2nd August 2016 07:10 PM

Hi ya,

They emailed me saying all the tubes for both Transmission tunnels are supplied! :D

alga 12th September 2016 12:11 AM

Zetec and Type 9 is a popular combo. One thing to keep in mind when making the chassis is that either the gear stick (and the reverse light switch), or the thermostat housing is interfering with the chassis. The solutions are either to use the Raceline Zetec water rail, or make a cutout in the tube that is the rear top of the engine bay (with another tube backing it), or modify the transmission tunnel and shift the engine a bit forward (compromising the gear stick reach).

https://get.google.com/albumarchive/...CvdS-B4840xtdI
https://get.google.com/albumarchive/...ZfGb5EXWQQVixG
https://get.google.com/albumarchive/...e3bQ8St8enHwpo

NeilW 12th September 2016 03:17 AM

I've got some Zetec engine mounts if they'd be useful for you

CarlW 12th September 2016 12:21 PM

Hi ya,

Which mounts are they?

Is there any reason the engine is so far back?
In my CAD model, the engine wasn't that far back?

TheArf 12th September 2016 04:44 PM

I think you will find you struggle to reach the gear stick if the engine is to far forward, my seats are on runners and I am able to reach but if your not on runners you have to very careful where you place the gear stick in relation to the seat, if that makes sense

Arfon

NeilW 12th September 2016 06:20 PM

Quote:

Originally Posted by CarlW (Post 104334)
Hi ya,

Which mounts are they?

Is there any reason the engine is so far back?
In my CAD model, the engine wasn't that far back?

If you look in my build diary you can just about see them. They are the round tube style ones. Really well made tbh. Also have a few other Zetec bits laying around, flywheels, clutch release bearings, spigot bearings, overhaul deal kit for type 9 box, shortened oil pickup maybe more but would need to dig them out.


All times are GMT +1. The time now is 01:00 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.