Maxi ball joint question
Hiya,
The Maxi ball joints I'm using didn't come with any mounting bolts, so I need to buy some. However: the Maxi flanges have Ø9mm holes, but the lower arms have Ø11mm holes. Just wondered what you guys have done? - Use M8 bolts to fit the Maxi flange - Drill out the flange to 10.5 or 11mm and use M10 bolts Cheers, Mike |
Drill and use high tensile bolts to suit.
|
Cool, thanks for the response!
|
All times are GMT +1. The time now is 04:07 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.