Flap Disc's
I know this was talked about before, but i can't the link.
But what is the best disc to use to clean up welds, as i intend to start fully welding my chassis weekend after next. Cheers Terry |
I personally used a grinder first and then the flap disc to polish the heavy grind marks out.
|
I recently bought some Dronco Ceramic Flap Discs, cost about £3.50 from weldequip's shop on the MIG Welding forum, but they are really good, last a lot longer than normal flap discs and take off a lot more material.
|
Quote:
I also have used the dronco stainless steel 1mm cutting discs and they are fab, worth the £1 each. recently bought some "newflex" ones off eBay and they are ok but don't last long. They were £15 for 50 (posted). |
I have the exact same cutting discs, They seem to last a fair while, I haven't had anything to compare them to as they are my first every set of cutting discs.
|
All times are GMT +1. The time now is 08:17 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.