I just realized that I might have misunderstood your question.
You were asking about the rivnuts to fit the side panels through the ally floor. Sorry
Quote:
Originally Posted by jps
how many rivnuts did you use for the side panels. And did you drill out your 3mm floor (I have 3mm alu for the floor too) to fit the rivnuts flush with the floor panel?
|
Yes, I drilled out the ally floor and used countersunk rivnuts, so they are flush with the floor. Rivnuts have to cope with 5mm thickness (2mm tube + 3mm floor). Mine were OK for that, I tried on a scrap tube and 3mm ally piece.
The link to my blog about that is:
http://vouchtroadster.blogspot.fr/20...panels-09.html
(I moved the "Translate" button on top of the side bar so it is easier to find.)
There are 4 rivnuts fitted through the floor (+ 3 directly on the tube, at the front of the chassis)
Also, these countersunk rivnuts I used to fit my side panels are M6 (9mm hole) and not M5 (7mm hole) as I said yesterday.
I hope I have now answered your question