yeah just the part at the drain plug as this hangs about 60mm lower than the rest of the sump.Im sure someone near you will be able to help.From what i recall my sump was about 50mm below the bottom rail thats why the part by the sump plug is machined off.just be aware that the sump alloy is very cheap quality shit and needs to be very clean to get a good penetrating weld.Im sure i recall there are a couple of companies who machine a whole new reduced height billet sump to suit this engine but cost about 500 quid!!You will also need to reduce the oil pickup pipe length.Maybe worth emailing few companies like Mk,spire etc.
I had mine done by Formula 27 ,now owned by image sportscars i think.
Currently a guy doing them on ebay for 28quid,says email him for different models .item number is 110450647037
On a different note i found the 3.62 ratio diff much more pleasant to drive than the 3.92 most people recommend.
Last edited by ozzy1 : 3rd November 2009 at 02:09 AM.
|