Thread: Harness Captive Nut Thread
View Single Post
  #4  
Old 6th November 2009, 03:26 AM
ozzy1's Avatar
ozzy1 ozzy1 is offline
Senior Member
  
Join Date: Jul 2009
Location: perth,australia
Posts: 760
Default
7/16 Unf is approx 11mm.Unf has been used for ages and is a fine thread.So you can got to 10mm or 12mm metric Fine.Personally i would go to 12mm but check that these will fit through the holes in the harness or seat belt.
Reply With Quote