Thread
:
Camber Adjuster Failure Warning!!!
View Single Post
#
30
26th March 2010, 10:32 AM
davidimurray
Senior Member
Join Date: Jan 2009
Location: Near Cardiff
Posts: 742
As a further bit of interest for this - I've done a graph comparing the bump loads that the Locost and Haynes sees. The actual values don't really matter, but i've taken a 35kg unsprung mass combined with a 5g bumpload. As you can see from the graph - both designs see the same loads - but becuase of the angle that the camber adjuster is at in the Haynes design - the load curve is shifted along - meaning that the ulitmate load seen by the Haynes trying to pull the adjuster out is 17% greater than that on the locost.
Attached Images
Camber Adjusters.pdf
(10.8 KB, 60 views)
__________________
Gallery 2
http://www.facebook.com/album.php?ai...4&l=a9831a9319
Gallery 3
http://www.facebook.com/album.php?ai...4&l=3f0d42c523
Gallery 4
http://www.facebook.com/album.php?ai...4&l=efb083b7df
Gallery 5
http://www.facebook.com/media/set/?set=a.10150244028550325.366987.601005324&l=583fd5 cd3a
Gallery 6
http://www.facebook.com/media/set/?set=a.10150550640070325.430417.601005324&type=1&l =fe779b358c
Last edited by davidimurray : 26th March 2010 at
10:34 AM
.
davidimurray
View Public Profile
Send a private message to davidimurray
Find all posts by davidimurray