Quote:
Originally Posted by rincewind23
Hey Dan, what gearbox are you using?
I've got the same engine but it came from a Landy and the gearbox is 4wd, which after some discussions on hear I have come to the conclusion I can't easily convert to the 2wd version.
Also, are you using the stock chassis, or a McSorley 442?
Cheers,
KEv.
|
i am using the standard haynes chassis the only modification that i have done is use 2mm thick box not the 1.6mm and i havent put the diagnal support in the engine bay (because as you can see from the photos there is not alot of room). i would also advise that you make the tranny tunnel about 20mm wider, its a squeeze to fit the gearbox in.
The gearbox i am using is an lt77 from a tr7. im using this mainly because 5th gear is a better ratio (its an overdrive gear really) compared to the other lt77 boxes.