Quote:
Originally Posted by antonia800
i have filled in this area br2 br9 meets top to bottom as i thought it was an area of likely corrosion salt, water, etc but whilst i totaly agree with you Andy cp25 fits on the outside of rp3 and not the inside as shown in diagram 4.14 page 43 so i fitted cp24 between rp2 and rp3 as in the left hand side of this diagram (4.14) yet another failure of discription !!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
Nope, CP24 is at the front, where Andy says it goes. It's a small triangular piece.
My book is in the garage, but given the number of Chassis' Andy has put together, I'm pretty certain that he, and all the rest of us who have fitted this plate, are correct.
And would you stop going on about "failures of description". You are building a car from scratch, there is bound to be the odd hurdle to overcome.
Even 'proper' kits rarely go together perfectly first time.