Ta for the compliments guys.....aint no way I am going to be posting every day but while I have the bit between my teeth here is a 24hr later update
metal bandsaws don't half rock
picking that real nasty angle on BR8/9 and using a steel rule to transfer to steel
ready to start tacking maybe tomoz
tidied up a bit
even at this early stage it is easy to say the metal bandsaw is THE tool for cutting box section and anything else come to that.
did have more piccies but I understand I am limited to 4 per post suppose I could have just posted again.
need to get a little practice on the welding front as it is some 30 yrs since I welded in anger and that was stick on steel upwards of 12mm thick and usually around 300-375 amps. I have used my mig for small bits and pieces it is only 130amps but is fan cooled and does not cut out.....need to calm down ...I am buzzin at the mo
ttfn...gonna have me a pint.