IVA and roll bar mounted belts
While going about the mornings business (ahem) flicking through an old copy of CKC mag and reading about AshG's IVA fail. Had a thought about the seat belt mounts that connect to the cross brace in the roll bar. What if you had two long or four small bars that wraped around the back of the buckles that sat at an upward angle. If they where 19-22mm round tube bent to 90' and cut with 45' angles you could heavy tack them on,run round the gap with silicone, paint over and hammer off after the test. I'll put one together later and take a pic.
|