The pedal box is very much a job still in progress, needing to sort out the clutch & throttle cable fittings.
Forgot to mention that the plate I made for that mod has 2 captive studs welded to the reverse side ( 8.8 set bolts )
I'll be using flat washers/nylocs throughout the build & loctite on anything captive
Now here's a little thing I personally like to do for peace of mind.
When it comes to final assembly, in particular, fixings.
Personally, I like to put a small dab of paint on any fixings that have just had it's final tighening.
I use Blue for anything that has been loctited & yellow for anything else
Silly I know but if it is done at the time of final tightening of each fixing it will give you a visual indication of any fixing that may of been overlooked