The workshop is 40x20ft but due to having a stud wall in the way for the machine shop that goes down to 30x20ft. Storage racks at the other end and the mill in the corner takes that down to 20x20ft. The wrapping and packing bench in the middle is 8x4ft sheet on tressels with the bandsaw on the end of it, so with all that in mind I only have the build table as work space. So my build area is 10x15ft not much more than a standard garage. I'm building the whole car on the bench then removing the heavy parts, putting the wheels on then refitting the engine and box when it's been cleaned and rebuilt. Just because you have a large area does'nt mean you have a large space to work in
