I found it easiest to make my own loom but retaining the engine / ecu wiring. There are not many circuits needed, from the front to the back of the car you need side lights, left indicator, right indicator, reverse, fog, fuel pump, brake and 2 wires for the fuel sender. At the front you have the hi and low beam, sides, left and right indicators, horn and fan. You need relays for fan, horn, hi and low, also a flasher / hazard relay. You need to wire up your dash but that's just "tapping in" to the circuits already mentioned plus a couple of wires for temp and alternator. I think it would have taken ages to cut out all the unwanted circuits and to trim down the wires that would be left.
Just my 2p worth.
|