Thread
:
Can I use 33.7 X 2.5mm For The Wishbone Bushing Tubes
View Single Post
#
4
13th December 2011, 01:02 PM
andysredmini
Member
Join Date: May 2011
Location: Stourbridge. West Midlands
Posts: 86
With regard to using bored out tube i.e. without a seam I read last night that some small spots of weld can be applied to the inside face of the tube to give a bit of a key for the bushes.
Has any one done this or got any thoughts on it?
Andy
__________________
http://bamaroadster.blogspot.com/
andysredmini
View Public Profile
Send a private message to andysredmini
Visit andysredmini's homepage!
Find all posts by andysredmini