Quote:
Originally Posted by wylliezx9r
The triangular part goes underneath. You can then use the fixings of your voice to attach it to the chassis. I used self tappers underneath and countersunk m6 Allen head bolts on top with rivnuts. The cutting template that has been posted is good but is only a guide and not completely accurate, as said before do it in card and offer it up. Hope this helps.
|
Yep, the cutting guide will need a bit of easing on mine to clear the bolts. But it's fine for first fit.
I had the crescent sections and tried them with the GRP rear tub and they would not fit. So they were cut/bashed off.
If your floor is quit thick then the lower lip may need removing on the side panels.
Having panels on transforms the car
TT