My set up currently uses m12 bolts. I was planning to replace these with the m14 bolts from mx5 nuts but will need some bush inserts that will allow the bolt to pass through. It also looks like the MX5 bolts are a tad too long hence you are using the spacers. The play on my set up is due to using an m12 bold in an m14 hole.
I'm not sure if Nathan from NTS is planning to offer something similar to this?
__________________
Click to see my build photos on Flikr
http://www.flickr.com/photos/67112582@N03/
Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack.
Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though).
Car iva'd and passed 15/08/2014. Finished weight 572kg.
|