Hi another update on possible suppliers for this. This email quote is from
http://www.tube-bender.co.uk/
It is for a flat pack of the cage we have been talking about but without the side protection bars, with a diagonal rear hoop brace and in 38.1mm CDS which was what I specced as I don't need it to be MSA approved but didn't want to use ERW.
Quote:
Hi Chris,
Thank you for your email.
The entire cage would be supplied in 38.1mm OD x 2.64mm Wall CDS as per your previous email. If you need different sizes it is not a problem, please let me know.
The price below is for the front hoop, back hoop, 2 connectors from the front hoop to the back hoop, the rear stays along with a diagonal rear brace.
It would total £290 plus £30 delivery.
If you would like to go ahead then please let me know and I will send you my Bank details. I will then produce my 3D CAD drawings and send them to you, just for your piece of mind.
Turn around time is around 3-5 days.
Let me know what you think.
I look forward to hearing from you.
Many Thanks
Tom Wood
Director
|
If your interested then please contact him.
Cheers
Chris