Quote:
Originally Posted by nickharding
I understand. So just weld the parts ontop as i described, then mirror and hand them on the second one, turn them both upside down and I have what i need?
Sounds better than i thought.
Oh right. So once I have RS15 tacked in place, I cant seam all the way around it like I will be doing with the bracket?
|
yes , you "got it"
I would suggest that you fully weld the bracket to the plate BEFORE welding the RS15 part, as its easier to get the welding torch/shroud around the bracket if RS15 is not in the way,
then
weld the inner face of the RS15 part (close to where the shock bracket/ top plate is ) leaving the outer edge & ends free of welds .....as these area,s have other parts that need putting very close to eachother, it,ll all become clear as you get further into the build up of the chassis
cheers
andy