Quote:
Originally Posted by Deanno
Any feedback or your oppinions are welcome.
Regards
Dean
|
Looking great Dean
Tho, may I suggest ....
To use hex headed bolts on the pivot & stop/adjusters, as , Once you have your side panels fitted its not easy getting into the footwell with TWO hands, so if hex headed bolts are used you can place a ring spanner on the head which will find a STOP so that you can either undo or adjust the actual nut, similar for the "adjuster bolts" ....as you,d need to depress the pedal to get an allen key into your current setup, would be easier to adjust if hex headed bolts were used ...
IMHO of course
cheers
andy