Sounds like a good plan Johno.
After receiving a quote of £400 to vinyl wrap my rear arches, scuttle, nose cone and bonnet and realising I could buy a new set of bodywork for £30 more I've been looking into other options to colour match my bodywork, with it looking more and more likely that I will paint it all.
I've learned tonight that you can buy specialist HPLV spray painters that are designer only for spraying, with prices starting at £100 for ones which can be used to spray cars, namely the Apollo Spraymate, and the price goes up for more professional setups. However they negative the need to own a bulky/noisy expensive compressor which I don't think I'd end up using. So I think in a few weeks when I have moved my car down south and have a lot more room in my parents garage I will buy an Apollo Spraymate from axminster + 2.5l of cellulose paint, primer and some etch primer and give it a shot.
A classic car magazine ran an article back in 2006 about the electric HPLV spray painting setups you can buy and they were pleasantly surprised and that you can get a good finish from using them.
So I will try and post a review with pictures when I eventually get mine.
I'm also trying to source the bends required for my exhaust system. I will be running one down pipe to my silencer and require a 45°, 90°, 6° and a 10° bend with a bit of straight to make it. I have decided that I will go for mild steel and weld it together myself and wrap it with the aim to eventually get a custom manifold made by MK Engineering. I can easily source the 45° and 90° degree bends, I have sent some quotes out to a few companies to try and get a 6° and 10° bend made up (these bends are to try and keep the exhaust as close as possible to the side panel).
I am also having to wait for a week before ordering my cooling system bits as Autosilicone Hoses have not got the technical dimensions for the distance between centres of the 25mm 180° bend that I require to join my top hose to my thermostat bypass hose as per the Westfield cooling system design. I need this dimensions to make sure that it will actually fit because if it doesn't then I need to rethink it all. However they don't keep the dimension on file and are out of stock so can't measure one for me.
So tomorrow I am going to crack on and find some other work that needs to be completed.
|