Thanks guys!
It's funny you mention distortion as I noticed this, you'll see in my pictures that I improvised with a block of wood screwed down over the tube as I tacked them, it seemed to help a bit.
Phil thanks for the reply, I think I'll heed your advice and just weld the tops and some sides, then crack on as you've suggested. I've already got the front frame tacked in place.
I've checked all my measurements including the diagonals, they've all come back spot on so far, I know it's only the bottom rails but is good to know.
Last edited by CJ27 : 6th April 2014 at 09:25 PM.
|