[CTWV50]

Originally Posted by metal matt

cheers
I am in doubt about the indicators on the scuttle where they are I might need to get some longer ones

https://www.flickr.com/photos/124541083@N02/

Yes if your tester is on the ball he will fail them on angles of disability to the rear, best to have them on the rear or edge of the front arches or in the edges of the rear arches.

See my thread on exactly this issue....

http://www.haynes.co.uk/forums/showp...&postcount=419

edit:

I have these for sale with the resistor blocks if you're interested, pain in the arse but removable and only a 4mm hole needs drilling.

http://www.haynes.co.uk/forums/showp...&postcount=431