the thread that Adrian posted pics of his chassis is titled
"Handyandy, the pics you were after"
its in the chassis section on third page about half way down.
as for how to do it............
basically you don,t need the bottom curved rails that form the rear tub frame, or the top frame either.
but you do need a tube, as like RP1 without the curved bits,( i used 25mm box steel ) to create the rear lower support frame for the fuel tank & for the D13,s to attach to.
maybe this explains what you don,t need when using the Triton rear tub......
RP1 & RP2
RP3,s
CP9,s
hope this helps a little.
cheers
andy
|