Thanks for the advice guys, I think I shall follow suit and leave it up on the table for as long as I can get away with it. It does create a little bit of a height issue as the garage is quite low, but I reckon I can work around it, being a short arse
Not much to report on the build this week, just a bit of tidying and finishing off. A last minute change has seen the brake pressure switch changed out for a bleed point (I'll use a mechanical switch), the brakes have finally bled properly, the handbrake is now connected and adjusted.
On the engine side the engine and gearbox are now rejoined and the engine back in and propshaft connected (thank you Michael at North West Propshafts).
