View Single Post
  #2  
Old 29th November 2011, 11:15 AM
davedew's Avatar
davedew davedew is offline
Senior Member
 
Join Date: Jul 2010
Location: Taunton
Posts: 342
Default

Vref is the +5v power supply to the TPS. The middle yellow wire is the TPS input to the megajolt. This value will increase with throttle opening.
The other wire connects to the same ground as the megajolt.

You have to get the outer wires connected the right way round. You should see an increasing value on the megajolt as you open the throttle. If you get a decreasing value the wires are the wrong way round.

Make sure you calibrate the TPS in the global settings and save the table it generates to the megajolt.
__________________
http://s831.photobucket.com/user/dav...ter%20Pictures

OTR 01/05/14 - 1.6 CVH, Type 9, Bike Carbs, Megajolt
Reply With Quote