Thread
:
Chassis Plate CP7 Orientation
View Single Post
#
3
15th November 2011, 12:45 PM
andysredmini
Member
Join Date: May 2011
Location: Stourbridge. West Midlands
Posts: 86
Thanks for the reply but it was the triangle piece cp7 i meant. not cp6 with the hole.
But if you put the 30mm hole in cp6 47.5mm in from the edge not the 50mm as the book the holes line up perfectly.
Thanks againg
Andy
__________________
http://bamaroadster.blogspot.com/
andysredmini
View Public Profile
Send a private message to andysredmini
Visit andysredmini's homepage!
Find all posts by andysredmini