View Single Post
  #1  
Old 26th October 2014, 08:13 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default Rosco's haynes Build "Warhawk"

Started my build last weekend, with the help of my Dad, just thought I would start a thread to share with you guys and get a few pointers along the way

A bit of background info, I'm 28, and a cnc miller by trade and my dads a carpenter so between us we get on with things ok, I've always loved cars and always wanted to build a kit car, I'm going down the bike engine route in a bare bones track chassis no luxury much to my dads disappointment, I'm going to work to the book and get it on the road as soon as I can, funds permitting, and then after that I will start replacing the uprights for cnc aluminium ones etc, but if I start doing those things now I will never get finished

First I got some sierra bits from a breakers yard for a bargain price,



I have stripped the hubs and they are at the blasters as we speak

Material ready to get started



Next we built a build table, we used a sheet of ply for the frame, and a sheet for the top


Last edited by Rosco : 30th January 2016 at 09:14 PM.
Reply With Quote