Hi all,
Just revisited my Roadster project after a break, and I wanted to get people's opinions on a mod I made to my brake master cylinder.
The original problem was: the slots on my m/c were too far spaced out to meet with the holes on the pedal box plate (which had been positioned as per the book - it looks like my donor m/c was an unusual Sierra type - typical!
).
I extended the slots on the m/c to 'fix' this issue. Having done this mod, I'm now worried that the SVA tester might not like it, even though the original design had slots anyway - any opinions?
Original m/c:
Modified m/c with wider slots:
Modified m/c roughly in position:
