View Single Post
  #17  
Old 30th March 2013, 09:35 PM
Stot's Avatar
Stot Stot is offline
Senior Member
 
Join Date: Nov 2012
Location: Wolverhampton
Posts: 750
Default

Quote:
Originally Posted by Shorty View Post
Ah ha!
Quick rub down and now i'm getting somewhere.
I have EYDE _ _ _ 4 6 3 5 Σ

So that proves it is a 1.8 anyway.

Some of them i'm not quite sure of but the centre is really bad and don't want to rub down too far.
Any idea where to get the acid?
I bought my last bottle of hydrochloric acid (17%) from http://mistralni.co.uk this is basically a 50/50 mix already but In the instructions link I posted it also says..

Quote:
An easily obtainable close approximation of this is swimming
pool muriatic acid, available from swimming pool and home improvement
stores, usually already in a diluted form.
So maybe a local spa or pool place would be easier.

If you are going to do this follow all the proper safety precautions, if diluting add the HCL acid to water not water to acid, but from the sound of it this could pull out the last few numbers.

Cheers
Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP
Build Started Jan 2013 : OTR Aug 2014 : Build Pictures

Last edited by Stot : 30th March 2013 at 09:38 PM.
Reply With Quote