Hi Rich
Orginally I had planned a different paint system but due to the lay up of over a year
& a healty light coat of rust, I had to change tack a little
Firstly, I cleaned the chassis the best I could ( Read, renoved the rust )
None of the metal was badly pitted & cleaned up quite well.
I gave the chassis two heavy coats of Galvafroid ( Zinc primer ). This was applied with a roller & fine brush for the tight corners.
This was overcoated with three light coats of Hammererite (Smooth ), applied by spray.
I don't personally rate hammerite as a brushing paint but it will spray OK & at least I know that it is compatable with a Galvafriod basecoat.
When I am ready & all is fully cured, I'll give the visible surfaces a final coat of a darker Red just to tone it down a little